Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Flexible Printed Circuit Board : Loft Transition: Unable to select bridge curves

Status
Not open for further replies.
CAD Application Support

CAD Application Support

Mechanical
Joined
Jan 24, 2020
Messages
80
Location
US
Hi All,

Iam having trouble to select bridge curves when trying to build loft transition in FPCB application in NX. NX1888. Is there a reason why Siemens do not allow this selection? I have to break the spline curve to small bits of curves by using simplified curve to get the loft transition to work.
 
Status
Not open for further replies.

Similar threads

Vyacad
  • Question Question
Unable to parse KRX file - ...\Siemens\NX2312\ReuseLibraryConfiguration.krx
Replies
1
Views
2K
Vyacad
Vyacad
N
  • Question Question
Through Curves command
Replies
8
Views
1K
Toost
Toost
N
  • Question Question
Through curves command // Blade help
Replies
0
Views
381
Nutria360
N
CAD2015
  • Question Question
NX 2212 - Sheets from curves..............
2
Replies
21
Views
8K
cowski
cowski
CAD2015
  • Locked
  • Question Question
Curves do not show in Assembly.
Replies
4
Views
2K
CAD2015
CAD2015

Part and Inventory Search

Sponsor

Back
Top