I'm looking for a polyurethane adhesive to bond a hard (75D) urethane casting to aluminum, but it needs to be pretty flexible (~60A). It will in fact be cycling in compression and tension constantly--it's for a automotive suspension bushing. So an adhesive thats designed for constant flexing would be ideal. This seems to fit the bill: , but it's the only product I could find that meets my requirements, and I'm not familiar with the company, so I'm curious if there are any other options. Any suggestions?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Flexible polyurethane adhesive
- Thread starter cgwiita
- Start date
I haven't heard of the referenced company, which really doesn't mean anything.
Here is a link to Reltek who make a lot adhesives for plastics and polymers. I would give them a call making sure you have all the parameters required at hand.
Here is a link to Reltek who make a lot adhesives for plastics and polymers. I would give them a call making sure you have all the parameters required at hand.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question