Good day,
I was recently working with a 6in flex hose component (as shown in the link), it will work with compressed air at 650F, 80psig and a flow of 380 ft/s.
I read that when the air flows over 150 ft/s, they place an inner liner to prevent the inner bellow excessive vibration and a possible failure.
But I wonder how high the flow can gets with this interlock liner? I asked the provider but couldn't get an exact answer, he gave me reference info.
Regards,
P.P.
I was recently working with a 6in flex hose component (as shown in the link), it will work with compressed air at 650F, 80psig and a flow of 380 ft/s.
I read that when the air flows over 150 ft/s, they place an inner liner to prevent the inner bellow excessive vibration and a possible failure.
But I wonder how high the flow can gets with this interlock liner? I asked the provider but couldn't get an exact answer, he gave me reference info.
Regards,
P.P.
