Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Flattening a surface.

Status
Not open for further replies.
Onamission

Onamission

Industrial
Joined
Oct 14, 2002
Messages
1
Location
GB
How can I flatten a 3D surface into its true 2d geometrical shape. I want to mark the shape onto carbon fibre to reduce the waste created when dropping into the mould. Thx in advance...
 
Sort by date Sort by votes
I am not a V4 guy but I believe there is a product in V4 named Develop which will do what you are asking. The functionality does not yet exist in V5 to my knowledge.

Jeff
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

DaveJFT
  • Question Question
Surface colour inheritance option
Replies
2
Views
4K
DaveJFT
DaveJFT
DaveJFT
  • Question Question
Component/surface highlighting
Replies
3
Views
5K
brucesilver
brucesilver
A
Catia Thick Surface Command Failed
Replies
3
Views
1K
MrCATIA
M
dctene2
  • Locked
  • Question Question
Macro To Extract A Surface In Space (& Understanding Selection Object)
Replies
3
Views
1K
dctene2
dctene2
rookiezzz
  • Locked
  • Question Question
Return the nearnest surface and edge from body against point
Replies
2
Views
2K
rookiezzz
rookiezzz

Part and Inventory Search

Sponsor

Back
Top