Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Flat Pattern in same view as model.

Status
Not open for further replies.
jerry1423

jerry1423

Mechanical
Joined
Aug 19, 2005
Messages
3,428
Location
US
I am on NX1961.
Does anybody have a way to show the flat pattern of a part in the same model view as its formed model ?
I really could use it right now.

Jerry J.
UGV5-NX1961
 
Sort by date Sort by votes
If you use the "flat solid" feature, it does show ?
( Not the flat pattern feature.)

Regards,
Tomas



Never try to teach a pig to sing. I wastes your time and it annoys the pig.:-)
 
Upvote 0 Downvote
Yes, use the flat solid command. If you already have a flat pattern feature you can make the flat solid external (RMB on flat pattern feature).

Also, depending what you're needing it for, you can create a new window and have the flat pattern open in one window while workoing on the model in the other.
 
Upvote 0 Downvote
Thank you both very much


Jerry J.
UGV5-NX1961
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Kenja824
  • Question Question
Model Items Selectable in Drafting View?
Replies
5
Views
676
Kenja824
Kenja824
W
  • Locked
  • Question Question
Determine Current Model View Angles
Replies
3
Views
2K
Toost
Toost
CAD2015
  • Locked
  • Question Question
Detail View in drawing - Modifications
Replies
2
Views
2K
CAD2015
CAD2015
C
  • Locked
  • Question Question
Hide features in drawing view
Replies
5
Views
4K
Rob_N
Rob_N
Nahid Mubin
  • Question Question
Exploded view from several assemblies to a single drawing file
Replies
2
Views
7K
cowski
cowski

Part and Inventory Search

Sponsor

Back
Top