Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Flash Method in HTRI Heat Exchanger Modeling for fluid properties generation

Status
Not open for further replies.
Phani Y

Phani Y

Chemical
Joined
Aug 3, 2019
Messages
39
Location
IN
Hi All,

Can someone please explain on what conditions should Differential and Integral Flash methods are to be applied for Heat Exchangers modeling in HTRI software?
For one of the exchangers modeling, when I applied Integral Flash method, I was not getting 30 Temperature points. Then I changed the Flash method to Differential method and then I got all 30 Temperature points. Why is it so?
 
Status
Not open for further replies.

Similar threads

MechTronApps
  • Locked
  • Question Question
Which CFD software for Raspberry 3 b+ for Aerial-Drone Aerodynamics study?
Replies
0
Views
1K
MechTronApps
MechTronApps
andradesilva
  • Locked
  • Question Question
Problem seeing results in Paraview,OpenFOAM
Replies
0
Views
729
andradesilva
andradesilva
Amine A
  • Locked
  • Question Question
heat transfer in an oven
Replies
8
Views
1K
IRstuff
IRstuff
pegus
  • Locked
  • Question Question
perforated plate modeling as porous domain ANSYS CFX
Replies
0
Views
792
pegus
pegus
poweredbyFLN
  • Locked
  • Question Question
Participate in $300k CFD online competition sponsored by Bureau of Reclamation
Replies
1
Views
815
IRstuff
IRstuff

Part and Inventory Search

Sponsor

Back
Top