Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Flange modeling
- Thread starter nolan51
- Start date
Dear Nolan51,
It is difficult to answer this with such a brief description of the component assembly. Also just as important is the design criteria that you are applying - ie what do you want the model to tell you (strength, stiffness, heat flow, vibration modes etc). Please send these further details and the subscribers will do our best to answer your question.
TERRY
It is difficult to answer this with such a brief description of the component assembly. Also just as important is the design criteria that you are applying - ie what do you want the model to tell you (strength, stiffness, heat flow, vibration modes etc). Please send these further details and the subscribers will do our best to answer your question.
TERRY
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question