Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
First out SOE
- Thread starter rhf
- Start date
Typically, Sequence of Events (SoE) recording provides one millisecond resolution between input status changes. This is necessar for some rotating machinery or other rapid response trip devices. Often safety shutdown equipment provide SoE indication but with less resolution, perhaps 10 ms. With sequence of events it is easier to observe what caused a trip than simple first out alarming.
If you are looking for information, powerpoints, presentation materials, etc., a good source is your local safety system vendor/sales rep. Most safety systems that I have dealt with have SOE built-in, an integrated offering, with the data historian. They would be able to send you information about their offering.
Does this answer your OP?
"Do not worry about your problems with mathematics, I assure you mine are far greater."
Albert Einstein
Have you read FAQ731-376 to make the best use of Eng-Tips Forums?
Does this answer your OP?
"Do not worry about your problems with mathematics, I assure you mine are far greater."
Albert Einstein
Have you read FAQ731-376 to make the best use of Eng-Tips Forums?
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question