Eng-Tips is the largest forum for Engineering Professionals on the Internet.
Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!
-
Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
First angle projection
- Thread starter R1100S
- Start date
![[ponder]](/data/assets/smilies/ponder.gif "[ponder] [ponder]")
Draw one? ![[smile]](/data/assets/smilies/smile.gif "[smile] [smile]")
![[cheers]](/data/assets/smilies/cheers.gif "[cheers] [cheers]")
Yep, draw one. That's what I did for 3rd angle projection.
![[bat]](/data/assets/smilies/bat.gif "[bat] [bat]")
"Customer satisfaction, while theoretically possible, is neither guaranteed nor statistically likely.--E.L. Kersten
"Customer satisfaction, while theoretically possible, is neither guaranteed nor statistically likely.--E.L. Kersten- Thread starter
- #4
Hey guys,
All you have to do is RMB on your drawing sheet select properties then select the First Angle Projection radio button. All views for that sheet will be first angle projection.
Hope this helps!
A man should look for what is, and not for what he thinks should be. -Albert Einstein
A person who never made a mistake never tried anything new. -Albert Einstein
All you have to do is RMB on your drawing sheet select properties then select the First Angle Projection radio button. All views for that sheet will be first angle projection.
Hope this helps!
A man should look for what is, and not for what he thinks should be. -Albert Einstein
A person who never made a mistake never tried anything new. -Albert Einstein
- Status
Similar threads
- Locked
- Question
- Locked
- Question