Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

FIRED HEATER MODIFICATION IN A REFINERY

Status
Not open for further replies.
ROMEUM2

ROMEUM2

Mechanical
Joined
Oct 13, 2009
Messages
24
Location
ES
Hi all,

I have to include a fired in a fired heater bottom. For this, i have to do several modifications in the bottom. One is to cut and modify the bottom beams, because the new burner will be installed in the middle of the fired heater.

someone has experience about this???

Thanks,
 
Status
Not open for further replies.

Similar threads

aegis4048
  • Locked
  • Question Question
Recommended temperature for Heater Treater
Replies
2
Views
3K
EdStainless
EdStainless
I
  • Locked
  • Question Question
Request for a Specification Document for a Heat Exchanger in the Oil Refining Sector
Replies
3
Views
6K
0707
0707
A
  • Question Question
Reamin-up in kelly system
Replies
0
Views
1K
A.M.Th95
A
Thompson Kakain
  • Locked
  • Question Question
Wireline tool not passing through a particular feet in a tubing
Replies
6
Views
1K
WANG PENG
WANG PENG
M
Subject: Dyke Wall Capacity Criteria as per NFPA/OGRA – Class-wise Tank Scenarios in General Plot Plan
Replies
14
Views
17K
Muhammad@ZEL
M

Part and Inventory Search

Sponsor

Back
Top