Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Fire zone classification of Jet fuel storage area

Status
Not open for further replies.

krishnarajsn

Electrical
Joined
Feb 5, 2015
Messages
1
Location
BH
Dear All,

What would be the fire zone of an aviation fuel (Jet A1) storage and handling area. It consists of 4 storage tanks, tanker loading area, tank loading facilities, etc.

Thanks
Kris
 
Does the fuel have a closed cup flash point temperature > 37.8 degrees C and is it stored at NTP? If so, hazardous location electrical classification is not required by NFPA 70, National Electrical Code.
 
NFPA-30 is a complex and lengthy document that covers tank and component location, emergency venting and many other provisions. Suggest that you contract with a consultant about tank farm/handling facility layout and component selection

According to this typical MSDS for Jet fuel A-1, the flash point is >100F and the OSHA/NFPA classification is Combustable class 2


There can be considerable variation in properties for A-1

This thread would be better suited in the eng-tips "Storage Tank" forum





MJCronin
Sr. Process Engineer
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top