Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Fire Suppression System (Novec)

Status
Not open for further replies.

darrenyee88

Mechanical
Joined
Jul 17, 2014
Messages
56
Location
SG
Hi,

I am new to this systems and would like to know the key area to look for during the testing and commissioning of this system?

Also, for maintenance point of view, can someone give me a guidance what documents are required are the pointers to look out for.

Thanks.
 
Everything you need is clearly and explicitly presented in NFPA 2001, Chapter 7. The fire alarm and detection system will require an acceptance test in accordance with NFPA 72, Chapter 14. ITM (Inspection, Testing, Maintenance) requirements are set forth in these same chapters.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top