Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Fire Protection System to externally bonded FRP
- Thread starter terry seh
- Start date
FYCE Co. have a UL-listed fire-rated insulation system up to 4-hours that is often used in the USA.
UL-listed fire protection systems are based upon the complete assembly, so in this case FYFE Co. epoxy, FFE CO. FRP and FYCE Co. insulation. You cannot swap-out/mix-match some components to achieve the assembly rating.
Sika, BASF, Simpson etc. may also have similar systems.
UL-listed fire protection systems are based upon the complete assembly, so in this case FYFE Co. epoxy, FFE CO. FRP and FYCE Co. insulation. You cannot swap-out/mix-match some components to achieve the assembly rating.
Sika, BASF, Simpson etc. may also have similar systems.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
