Finding OEM standard information (Pulp and Paper machinery) 1

[Drturner]

I'm trying to find information on machinery built by "Karlstads Mekaniska Werkstad" prior to it's being purchased by Valmet Paper Machinery.

I found this:

http://www.karlstad.se/eng/sola/7.shtml

with Google, but it's not very much help in terms of finding out specific engineering information.

I'm trying to confirm that my design for some internal components of an old piece of paper machinery they built will function as well as or better than was originally intended when the machine was first built (we're going to supply them with what they need to rebuild the machine, but the original parts we are supplying were consumed during operation and I'm basically designing parts to fill in the gaps of information from when our service tech inspected the machine).

I'm not expecting some huge presentation of information, but rather some help finding an actual resource that has standard information in it. Like a listing of patent numbers that company filed for their designs (as patented designs are also public record, if I recall correctly), or something along those lines.

 

[panduru]

From my search,

it seems "Karlstads Mekaniska Werkstad" is now "Metso Paper AB".

Maybe you could also try contacting Metso Corporation, Finland (

http://www.metso.com)

and (

http://www.metsopaper.com)

Metso Paper Karlstad AB, Karlstad Service Center

Visiting address
Axel Johnsons väg 6
SE-651 15 Karlstad
SWEDEN

Postal address
PO Box 1014
SE-651 15 Karlstad
SWEDEN
Tel: +46 54 171 000
Fax:+46 54 171 241
Email: paper.service@metso.com
24-hour Emergency Service: +46 703 177 900
Functions: Service

All the Best.