Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Finding correct Catpart for drawing in Catia V5

Status
Not open for further replies.
felixmathais

felixmathais

Mechanical
Joined
Nov 17, 2003
Messages
2
Location
GB
Is there a method to load the corresponding 3d file for a given drawing?
 
Sort by date Sort by votes
If you have the drawing open. Go to Edit/Links and look at the pointed documents tab. This will show you what file(s) are linked to the drawing.

Jen
 
Upvote 0 Downvote
Or File-Desk and you'll see the model structure of all opened models, including drawings.

/O
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

D
Catia V5 Drawing uppercase
Replies
2
Views
1K
Rickyt
R
A
  • Question Question
CATIA V5 DRAFTING/DRAWING TITLE BLOCK SCALE UPDATE
Replies
5
Views
4K
amadali
A
A
CATIA v5 Generative Drafting Drawing Links
Replies
1
Views
982
MrCATIA
M
J
  • Locked
  • Question Question
CATIA V5 Macro Replace drawing links
Replies
1
Views
3K
Little Cthulhu
Little Cthulhu
A
  • Question Question
CATIA V5 ASSEMBLY DESIGN CONSTRAINS
Replies
4
Views
6K
ferdo
ferdo

Part and Inventory Search

Sponsor

Back
Top