BADARINATH.M.S
Mechanical
HOW TO FIND GEAR TYPE OF 95 NUMBER OF TEETH ,MODULE=3 ,OUTER DIAMETER OF 283.35 MM?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
FIND GEAR TYPE USING BY REVERSE ENGINEERING
- Thread starter BADARINATH.M.S
- Start date
- Status
BADARINATH.M.S,
I am doing the math in my head here. A gear with 95 module[ ]3 teeth should have a pitch diameter of 285mm. The OD should be something like 291mm.
Are you trying to work out the specifications of a gear in your possession? If so, are you sure it is metric?
--
JHG
I am doing the math in my head here. A gear with 95 module[ ]3 teeth should have a pitch diameter of 285mm. The OD should be something like 291mm.
Are you trying to work out the specifications of a gear in your possession? If so, are you sure it is metric?
--
JHG
- Status
