Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

fillet welding close to Cupro/nickel Tubes

Status
Not open for further replies.
demsha

demsha

Materials
Joined
Feb 20, 2010
Messages
71
Location
CA
Hello everyone,

I need to weld channels which hold the plate as shown in the picture to the Chiller support. The welding method is SMAW using 7018 rod. My concern, will there any damage to the CuNi 90/10 cooling tubes adjacent to welding of these channels?

IMG_5492_ic7nrj.jpg


Appreciate for early response.
Demsha
 
Sort by date Sort by votes
No damage to the Cu-Ni tubes based on your configuration.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Engingeeer
  • Question Question
nut welding fixture
Replies
2
Views
13K
Engingeeer
Engingeeer
IdanPV
  • Question Question
Welding of S355JR
Replies
1
Views
491
kingnero
kingnero
nabeel3
  • Locked
  • Question Question
Corrosion Test for Nickel Alloy 825
Replies
2
Views
4K
weldstan
weldstan
Spike2000
  • Question Question
tig welding tubing, fitting face perpendicular to tubing
Replies
14
Views
7K
Tmoose
Tmoose
SAEEDGH
  • Question Question
stud welding manufacture process
Replies
3
Views
741
mfgenggear
mfgenggear

Part and Inventory Search

Sponsor

Back
Top