Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

filler rods?

Status
Not open for further replies.
steve5000

steve5000

Mechanical
Joined
Jan 28, 2003
Messages
6
Location
GB
Can any one tell me what filler rods to use to weld stainless steel 1.4841 together, that will withstand 1000C thanks.
 
Sort by date Sort by votes
Stainless 314, equivalent to 1.4841, is apparently not yet covered by AWS Standards. Depending on application 310 filler metal may be adequate.
At 1000C there will be some oxidation resistance, not much strength.

 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

DavidLove
  • Question Question
Checking inclusion content of weld filler material
Replies
3
Views
10K
EdStainless
EdStainless
JoshRanch
  • Question Question
AWS 5.01 Requirements for reviewing Filler Metal Supplier Quality Program
Replies
1
Views
413
David3399
D
D
  • Locked
  • Question Question
steel weld filler and process with extremely machinability
Replies
2
Views
2K
dtimberlake
D
mrmalcolm
  • Locked
  • Question Question
Range of filler material for welding procedures qualification in ISO 15614-1
Replies
3
Views
3K
kingnero
kingnero
Karik87
  • Locked
  • Question Question
Filler Metal for welding of ASTM B148 C95800
Replies
8
Views
1K
bruv
bruv

Part and Inventory Search

Sponsor

Back
Top