Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Filler Metal for Welding Nitronic 50 High Strength to 316L

Status
Not open for further replies.
cb418

cb418

Mechanical
Joined
Mar 5, 2007
Messages
4
Location
US
What would be the recommended filler metal for joining these two materials? 308L, 316L, 209? Naturally the strength and corrosion resistance need only be at least that of the 316L. Any information or links/references would be greatly appreciated. Thanks.
 
Sort by date Sort by votes
Welding on Nitronic 50 (22-13-5)High Strength is not recommended due to the loss in strength at the weld. But in your case the resulting affected area will still be as good as the 316L Depending on the environmental exposure You may want to use a 309-Mo filler metal.

 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

JoshRanch
  • Question Question
AWS 5.01 Requirements for reviewing Filler Metal Supplier Quality Program
Replies
1
Views
416
David3399
D
Aloni
  • Locked
  • Question Question
welding 304L to 304L with 316L filler metal
Replies
8
Views
1K
sdz
sdz
Karik87
  • Locked
  • Question Question
Filler Metal for welding of ASTM B148 C95800
Replies
8
Views
1K
bruv
bruv
MRondini
  • Locked
  • Question Question
Welding Stainless Steel 310 to 316L
Replies
3
Views
1K
EdStainless
EdStainless
metboss
  • Question Question
Welding Procedure Specification (WPS) for the base metal AISI 8630(weld overlay cladding
Replies
2
Views
563
gtaw
gtaw

Part and Inventory Search

Sponsor

Back
Top