Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
FIELD WELDS
- Thread starter braves25
- Start date
Come back with a little more description of what length are you concerned with. Are you talking about structural welding
If you have design that is by code all the welding should be called out and the amount of weld is adequate. There is no need to add a safety factor. The additional welding can be detrimental in some cases. If you think a weld is undersized consult with Engineer in Charge with your concerns.
If you have design that is by code all the welding should be called out and the amount of weld is adequate. There is no need to add a safety factor. The additional welding can be detrimental in some cases. If you think a weld is undersized consult with Engineer in Charge with your concerns.
- Status
Similar threads
- Question
- Question
- Locked
- Question
- Locked
- Question