Hammerhead247
Electrical
I would like to convert my field strength readings from V2/M2 to uW /cm2 Can someone please post the conversion equation.
Thanks
Thanks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
field strength conversion
- Thread starter Hammerhead247
- Start date
- Status
Assuming that you're in the far field (and in a vacuum or air), then you may assume that the freespace impedance is 377 ohms (120*Pi ohms). The rest is just Ohm's law and simple math. Pay attention to the units of distance and area. Bring the units along with the numbers as a sanity check. It should be volts per meter (linear) and watts per square meter (area) - for example.
PS: Google is your friend.
PS: Google is your friend.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question