Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations Ron247 on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Fiberglass punching shear.

Status
Not open for further replies.
njas2000

njas2000

Structural
Apr 21, 2011
1
I am using a 1/2" fiberglass plate from Strongwell and I want to put a 1/2" bolt with a standard washer through it. How can I find the shear capacity of the plate? Basically, I want to check this for punching shear.
 
Status
Not open for further replies.

Similar threads

S
  • Locked
  • Question
Dust generated during punching of the RPET sheet
Replies
1
Views
971
3DDave
3DDave
S
  • Question
Bolts in Shear on Circumferential Bolt Pattern
2
Replies
22
Views
5K
dik
dik
Otibix
  • Locked
  • Question
Shear Strength of Glass Ceramics
Replies
8
Views
784
btrueblood
btrueblood
breezy83
  • Locked
  • Question
Brass Cylinder Shear Failure 3
Replies
3
Views
402
rothers
rothers
Otibix 1996
  • Locked
  • Question
Shear Pin Design 1
Replies
17
Views
2K
Tmoose
Tmoose

Part and Inventory Search

Sponsor

Back
Top Bottom