Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

FEMAP TOTAL LOAD CHECK/LOAD COMPUTE/LOAD DUE TO PRESSURE

Status
Not open for further replies.

Xprivate

Aerospace
Joined
May 26, 2023
Messages
55
Location
CA
Hi All

i am looking for a way to verify my total load on my model. I also want to know how i can check the total load (lbs or N) acting on my model due to a non-uniform pressure acting on my model. Thanks in advance.
 
the easy way (AFAIK) is to print the output and read the OLOAD table

"Hoffen wir mal, dass alles gut geht !"
General Paulus, Nov 1942, outside Stalingrad after the launch of Operation Uranus.
 
I would also try using Tools > Check > Sum Forces
 
Thank you guys! Appreciate your help
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top