Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Feature list contains errors

  • Thread starter Thread starter dr_gallup
  • Start date Start date
D

dr_gallup

Guest
Wildfire 4 part modeling

I have a rather complicated family table part with quite a few features that get turned on & off in the various instances. When I am in the generic and verify the family table, it tells me all the instances regenerate successfully.

However. when I open up the instances, I get a message saying that the feature list contains errors and a warning: Attempting to regenerate with errors. Some, but not all, of the instances are missing features. However, it is not opening up a message window or writing any error file to disk.

View attachment 6347

Any ideas how to trace this down and fix it?
 

Attachments

  • Capture.JPG
    Capture.JPG
    17.8 KB · Views: 9
Have you tried deleting and thereby forcing re-creation of the accelerator files? Fellow workers here have reported problems with the accelerator files getting out of whack with the actual CAD which sound similar to what you are seeing.
 
Have you tried deleting and thereby forcing re-creation of the accelerator files? Fellow workers here have reported problems with the accelerator files getting out of whack with the actual CAD which sound similar to what you are seeing.

I did that last night after posting and it seemed to fix the problem. I also deleted the index file at the same time as I was busting some of the instances out of the family table and having trouble with Pro/E not wanting to find the new stand-alone parts.
 

Part and Inventory Search

Sponsor

Back
Top