Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Feature based machining - get CSYS of recognized feature

Status
Not open for further replies.
kukelyk

kukelyk

Industrial
Joined
Mar 21, 2005
Messages
315
Location
HU
When find features makes new machining features, they have their own csys. It is very good for 3+2 drilling, but.
For drilling, they need a MCS, where the Z direction is the same. If I could winkle the CSYS data out, I could make it automatically.. Is there a way to accomplish it?
thanks in advance

----
kukelyk
 
Status
Not open for further replies.

Similar threads

E
  • Question Question
Seeing individual elements of an instantiated Feature Template? (Part Navigator)
Replies
1
Views
4K
cowski
cowski
MANox
  • Locked
  • Question Question
NXJournal-select feature on drawing (filtr)
Replies
0
Views
1K
MANox
MANox
CAD2015
  • Locked
  • Question Question
Feature Recognition......................
Replies
7
Views
829
Toost
Toost
niedzviedz
  • Locked
  • Question Question
AskSymbThreadParms - unknow feature type
Replies
3
Views
401
niedzviedz
niedzviedz
Proizvodnja
  • Locked
  • Question Question
Pattern Feature
Replies
0
Views
277
Proizvodnja
Proizvodnja

Part and Inventory Search

Sponsor

Back
Top