Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

FEA and Pressure Vessel

  • Thread starter Thread starter napoleonm
  • Start date Start date
Status
Not open for further replies.
N

napoleonm

Guest
Hello folks.


I would like to iniciate a Forum about pro/mechanical and pressure vessel design..


Topic includes: Modeling for FEA / stress linearization / othres..


Please let me know.
 
You are in the right forum. Please ask a specific question.



- Administrator
 
Status
Not open for further replies.

Similar threads

Henry26
  • Locked
  • Question Question
How to perform FEA with GAP contact?
Replies
1
Views
674
kranmeste
kranmeste
P
Self Weight and Displacement
Replies
0
Views
7K
Panayotis_A
P
L
Test Defined Hyperelastic Materials
Replies
1
Views
4K
dr_gallup
D
T
Angle analysis feature to be used as a dimension in a drawing table
Replies
1
Views
14K
annad_m_s
A
A
Pro/Mechanica Material Assignment and Meshing for Assemblies
Replies
0
Views
6K
AMega
A

Part and Inventory Search

Sponsor

Back
Top