Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Fe alloy type, low alloy with W

Status
Not open for further replies.

velo

Materials
Joined
Dec 2, 2001
Messages
1
Location
AU
I have an instrument shaft with an analysis of C 0.12%, Mn 0.4%, Si 0.2%, Cr 0.6%, Mo 0.15%, Cu 0.2% and W 0.5%;
Any ideas on alloy type/classification or manufacturer's ID?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top