Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Faulty TLE6220

Status
Not open for further replies.
SjakieW

SjakieW

Civil/Environmental
Joined
Jun 21, 2006
Messages
1
Location
NL
Who have experience with faulty TLE6220.
Very recently (last month) we have a lot of faulty TLE6220 (Smart Quad Low Side Switch). Some or all outputs are either constantly On of Off. We are using a number of 50K+ devices each year.

Thanks in advance
 
Sort by date Sort by votes
Sounds like it is being miss applied or hung out to dry. What are you controlling with the buggers?

I would be looking for inductive kicks toasting them. Or they are being cooked due to over heating.

Could they(not looking at a data sheet) be having soldering failures so that they are able to conduct their heat into the board or something?

Be useful to see a picture of the board and that part of the schematic.
faq238-1161

Keith Cress
Flamin Systems, Inc.-
 
Upvote 0 Downvote
Have you asked your supplier to forward the devices for failure analysis or to provide application support ?

 
Upvote 0 Downvote
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top