Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Fatigue life of Expansion bellows

Status
Not open for further replies.
DK44

DK44

Mechanical
Joined
Sep 20, 2017
Messages
196
Location
IN
Does fatigue life (No. of cycles for failure) differ between EJMA calculations and ASME Sec VIII Div 1 Appendix 26 for unreinforced Thin Wall bellows. If so what are the differences and why.
 
Status
Not open for further replies.

Similar threads

BSAS-GWB
  • Question Question
Fatigue - Nozzle Inside Corner Radius
Replies
2
Views
11K
CuMo
CuMo
KevinNZ
  • Locked
  • Question Question
EN 1993-1-9 assessment of fatigue
Replies
0
Views
1K
KevinNZ
KevinNZ
mkdjssteel
  • Question Question
Fatigue analysis of Rectangular Autoclave 1140 x 2100 x 7040 mm
Replies
4
Views
2K
TGS4
TGS4
nashki
  • Question Question
Fatigue Assessment - Elastic-Plastic Analysis SS316
Replies
7
Views
7K
YuJie_PV
YuJie_PV
krzychu1904
  • Question Question
Local Vs global stress and fatigue analysis in fea analysis
Replies
9
Views
17K
TomLee777
TomLee777

Part and Inventory Search

Sponsor

Back
Top