Jun 18, 2012 #1 kevlar49 Materials Jun 1, 2006 287 Does anyone know a good reference for obtaining fatigue curves for nitronic 60? I already checked "atlas of fatigue curves" by Howard Boyer.
Does anyone know a good reference for obtaining fatigue curves for nitronic 60? I already checked "atlas of fatigue curves" by Howard Boyer.
Jun 18, 2012 #2 Metalhead97 Materials May 6, 2011 104 kevlar49, Have you checked the MIL handbook ? MH http://www.linkedin.com/pub/luke-autry/1b/510/566 Upvote 0 Downvote
Jun 18, 2012 #3 metengr Materials Oct 2, 2003 15,478 I did see actual tabular values for Nitronic 60 based on a brochure that I obtained some time ago (High Performance Alloys, Inc.) The tabular values were; Annealed Bar, 1" dia, 37.5 Ksi fatigue limit for 108 cycles Cold Worked 54.6%, 0.70" dia, 72.5 Ksi for similar cycles (Fatigue testing on an RR Moore machine). Upvote 0 Downvote
I did see actual tabular values for Nitronic 60 based on a brochure that I obtained some time ago (High Performance Alloys, Inc.) The tabular values were; Annealed Bar, 1" dia, 37.5 Ksi fatigue limit for 108 cycles Cold Worked 54.6%, 0.70" dia, 72.5 Ksi for similar cycles (Fatigue testing on an RR Moore machine).
Jul 4, 2012 #4 enmax Materials May 17, 2007 51 Metengr's data can be found in the brochure at http://www.hpalloy.com/alloys/brochures/Nitronic60book.pdf http://uk.linkedin.com/pub/terry-roberts/28/a9a/a10 Upvote 0 Downvote
Metengr's data can be found in the brochure at http://www.hpalloy.com/alloys/brochures/Nitronic60book.pdf http://uk.linkedin.com/pub/terry-roberts/28/a9a/a10
