fatigue curves for nitronic 60

[kevlar49]

Does anyone know a good reference for obtaining fatigue curves for nitronic 60? I already checked "atlas of fatigue curves" by Howard Boyer.

 

[Metalhead97]

kevlar49,

Have you checked the MIL handbook ?

MH

http://www.linkedin.com/pub/luke-autry/1b/510/566

 

[metengr]

I did see actual tabular values for Nitronic 60 based on a brochure that I obtained some time ago (High Performance Alloys, Inc.)

The tabular values were;

Annealed Bar, 1" dia, 37.5 Ksi fatigue limit for 10⁸ cycles

Cold Worked 54.6%, 0.70" dia, 72.5 Ksi for similar cycles

(Fatigue testing on an RR Moore machine).

 

[enmax]

Metengr's data can be found in the brochure at

http://www.hpalloy.com/alloys/brochures/Nitronic60book.pdf

http://uk.linkedin.com/pub/terry-roberts/28/a9a/a10