gurugarzah
Computer
- May 18, 2006
- 1
Hi everyone, I am wondering if anyone may be able to set me off in the right direction.
Currently we have a Hurco KM5P pretty old > 16 years.
we have a program that is 19 blocks and takes about three minutes and that has been optimized to the best of hurco's knowledge. It pretty much drills about thirty holes some are bored, and at least 21 of the holes are drilled at bit width. I want to know if there is a Machine that any one can recommend off of the top of there head that would get me down to a minute or less? Thanks Guys.
Guru^garzaH
Currently we have a Hurco KM5P pretty old > 16 years.
we have a program that is 19 blocks and takes about three minutes and that has been optimized to the best of hurco's knowledge. It pretty much drills about thirty holes some are bored, and at least 21 of the holes are drilled at bit width. I want to know if there is a Machine that any one can recommend off of the top of there head that would get me down to a minute or less? Thanks Guys.
Guru^garzaH