GainControl
Mechanical
I am having a very difficult time finding a supplier of cap screws in the US willing to comply with the EN 10204 Type 2.2 documentation. Does anyone know of one?
Thank you in advance!
Thank you in advance!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
FASTENERS FOR PED APPLICATION
- Thread starter GainControl
- Start date
- Status
Sircrashalot
Mechanical
You may need to go to Europe to find them. We supply flange bolting to the oil & gas industry with 3.1b certification and buy mostly from Tripplefast in the UK and OME out of Italy. I also have some M8x45 socket head cap screws in F55 on my desk if you are interested ;-) (client decided that they needed titanium instead).
Oh - expect to spend $$ though. Metal with paper behind it is not cheap.
Andy
Oh - expect to spend $$ though. Metal with paper behind it is not cheap.
Andy
- Status