Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

fast finite element model generation and simulation methods for knee joint

Status
Not open for further replies.
saja11

saja11

Bioengineer
Joined
Aug 2, 2019
Messages
42
Location
FI
Need to implement fast finite element model generation and simulation methods for knee joint from planar x-rays...need recommendation?
 
Sort by date Sort by votes
Status
Not open for further replies.

Similar threads

vanji1
  • Locked
  • Question Question
If I want to construct myself a geometric stiffness matrix induced by a pre constraint with finite element modeling
Replies
0
Views
1K
vanji1
vanji1
YuJie_PV
  • Question Question
1/2 loading for 1/2 model in ansys?
Replies
9
Views
10K
YuJie_PV
YuJie_PV
A
  • Locked
  • Question Question
Help with Adaptive Quadrature in Finite Cell Method
Replies
3
Views
2K
rb1957
rb1957
G
  • Question Question
FEA Simulation of a Piezoelectric Accelerometer with Frequency Response Analysis
Replies
2
Views
9K
gnana_235
G
AACING
  • Locked
  • Question Question
Methods to add rotation dof to solid with ABAQUS, MSC NASTRAN and SAMCEF
Replies
3
Views
2K
GVDR
G

Part and Inventory Search

Sponsor

Back
Top