Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Factory Talk View Site Edition, Transfer onto Machine edition
- Thread starter HSM2010
- Start date
EddieWillers
Electrical
Not automatically. Many of the features present in FactoryTalk View SE are not supported by FactoryTalk View ME.
In general, migration works better in the other direction.
Some things have no equivalent; ME has just one data model, for example, and doesn't support VBA.
Some things just work differently. For example, Pushbuttons in FTView SE have actions assigned to them, which can be FTView Commands or simple "set tag = value" functions. A Pushbutton in FTView ME is a pre-packaged object like momentary, maintained, or interlocked, with a simpler data connection.
But some of the features should be transportable by Exporting them in SE and Importing them in ME, or just by importing objects into the ME project. Right-click on the Display folder, for example, and try Importing a *.GFX (the Display file format) from the SE project.
You might find some good help over on the RA Forums; forums.rockwellautomation.com.
In general, migration works better in the other direction.
Some things have no equivalent; ME has just one data model, for example, and doesn't support VBA.
Some things just work differently. For example, Pushbuttons in FTView SE have actions assigned to them, which can be FTView Commands or simple "set tag = value" functions. A Pushbutton in FTView ME is a pre-packaged object like momentary, maintained, or interlocked, with a simpler data connection.
But some of the features should be transportable by Exporting them in SE and Importing them in ME, or just by importing objects into the ME project. Right-click on the Display folder, for example, and try Importing a *.GFX (the Display file format) from the SE project.
You might find some good help over on the RA Forums; forums.rockwellautomation.com.
- Status
Similar threads
- Locked
- Question