Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

F6NM Hardness Acceptance Criteria

Status
Not open for further replies.
WeldGk

WeldGk

Materials
Joined
Aug 14, 2007
Messages
42
Location
CA
Does nayone know where I can find hardness acceptance for F6NM for NACE MR0175 in terms of HV10 (Table A.18 of ISO 15156 only provides acceptance in terms of Hrc (23)) and the conversion factors in ASTM do not apply to martensitics.
 
Status
Not open for further replies.

Similar threads

V
  • Question Question
Chloride criteria in MR0175/ISO 15156-3 for austenitic stainless steels
Replies
12
Views
16K
SJones
SJones
Shivasankar2593
  • Locked
  • Question Question
ASTM AG48 Method A - Acceptance criteria
Replies
9
Views
1K
EdStainless
EdStainless
montbIanc
  • Locked
  • Question Question
Marine sacrificial anodes - Clarification of design criteria
Replies
4
Views
1K
FacEngrPE
FacEngrPE
Corroneer
  • Locked
  • Question Question
SSC for Piping with Unknown Hardness Levels?
Replies
3
Views
352
SJones
SJones
SiggiN
  • Locked
  • Question Question
Hardness test location
Replies
1
Views
344
jmec87
jmec87

Part and Inventory Search

Sponsor

Back
Top