davidneedshelp
Automotive
Is it possible to perform an extruded cut in Solidworks using a guide profile, as you would with a swept boss?
Thank you for your help.
Thank you for your help.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Extruded Cut with guide 1
- Thread starter davidneedshelp
- Start date
![[pc2]](/data/assets/smilies/pc2.gif "[pc2] [pc2]")