Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Extract the data from a batch of analyses
- Thread starter Mcakir
- Start date
GPapazafeiropoulos
Civil/Environmental
Dear Mcakir,
You can try to extract these results from the corresponding fil files (if you do not have them already, then unfortunately you have to rerun the analyses in Abaqus by appropriate modifications of the input files). Check the Abaqus2Matlab toolbox for more information. A new version will soon be released which will have the capability of postprocessing results from odb files.
Best regards,
George Papazafeiropoulos
You can try to extract these results from the corresponding fil files (if you do not have them already, then unfortunately you have to rerun the analyses in Abaqus by appropriate modifications of the input files). Check the Abaqus2Matlab toolbox for more information. A new version will soon be released which will have the capability of postprocessing results from odb files.
Best regards,
George Papazafeiropoulos
I have exported stress data from a .odb using a Python script. See this post:
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question