Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

External Data vs *MOPER,,,MAP

Status
Not open for further replies.
rickfischer51

rickfischer51

Mechanical
Joined
Jun 27, 2013
Messages
453
Location
US
Does External Data use *MOPER,,,MAP or does it have its own distinct coding? I have some data that is suspect, and it produces similar results in both. Is that confirmation that the data is hosed, or am I using the same knife to skin the cat?

Rick Fischer
Principal Engineer
Argonne National Laboratory

Rick Fischer
Principal Engineer
Argonne National Laboratory
 
Status
Not open for further replies.

Similar threads

Tegguy
  • Locked
  • Question Question
ANSYS: Beam Elements vs Joint Stiffness?
Replies
11
Views
2K
Tegguy
Tegguy
Faraz1997
  • Locked
  • Question Question
How to reduce number of iterations in tabular data of transient thermal analysis
Replies
3
Views
1K
NRP99
NRP99
shiraz883
  • Locked
  • Question Question
Different results in ANSYS 2021 vs ANSYS 2022
Replies
0
Views
493
shiraz883
shiraz883
andradesilva
  • Locked
  • Question Question
How to get and save in an external text file the maximum nodal displacements a single volume
Replies
0
Views
244
andradesilva
andradesilva
PedroCarneiro22
  • Locked
  • Question Question
NFORCE vs FSUM
Replies
8
Views
1K
PedroCarneiro22
PedroCarneiro22

Part and Inventory Search

Sponsor

Back
Top