Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Export via ACIS to SAT v-3?

Status
Not open for further replies.
cfee

cfee

Industrial
Joined
Apr 22, 2002
Messages
491
Location
US
Export via ACIS to SAT v-3?

In an earlier release of S.E., we were able to select the level of SAT to export. I can't find that with my newer version of S. E.

Any Suggestions?

Thanks-
C. Fee
 
Sort by date Sort by votes
Click "save as", select ACIS, then there should be an "options..." Button under the "Save as type" selection window. At least it is on mine for SE ver15.

 
Upvote 0 Downvote
Moldcore-
THANKS !!!
C. Fee
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

J
  • Locked
  • Question Question
VBA to Pull Total Surface Area and Volume for a Part of an Assembly?
Replies
0
Views
1K
jdconnel
J
NirVidP
  • Locked
  • Question Question
How to 'Create Part In Place' using vba?
Replies
0
Views
967
NirVidP
NirVidP
jcpalekar
  • Locked
  • Question Question
How to handle occurrence properties of solid edge through excel sheet?
Replies
0
Views
1K
jcpalekar
jcpalekar
Vikas4auto2019
  • Locked
  • Question Question
How to add bulk components in to the assembly.
Replies
0
Views
926
Vikas4auto2019
Vikas4auto2019
QuentinMoran
  • Locked
  • Question Question
3rd Party dft Viewer
Replies
1
Views
1K
matnas
matnas

Part and Inventory Search

Sponsor

Back
Top