Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Export/Save as an assembly to jpeg
- Thread starter caruana
- Start date
What version of software are you using?
Not that it matters becasue you cannot do that without some custom programming.
If you run Windchill, then a check-in will generate images for each file in your assembly in ProductView/CreoView, if you have it set to do that.
"Wildfires are dangerous, hard to control, and economically catastrophic."
Ben Loosli
Not that it matters becasue you cannot do that without some custom programming.
If you run Windchill, then a check-in will generate images for each file in your assembly in ProductView/CreoView, if you have it set to do that.
"Wildfires are dangerous, hard to control, and economically catastrophic."
Ben Loosli
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Solved