Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Export of tiff file
- Thread starter dabear007
- Start date
What version of UG are you using? Are you exporting an image of your model, of a rendering, of a drawing or what? There are several things that can be exported as tiff images, but not all methods are the same.
Tim Flater
Senior Designer
Enkei America, Inc.
Tim Flater
Senior Designer
Enkei America, Inc.
- Thread starter
- #3
If on a Windows platform, just hold down the Alt key & hit Print Screen. Open up your image viewing/editing software (like M$ Photo Editor or Irfanview) and then Paste (Ctrl + V) and save as a tiff.
As far as I know, there is no control over the image orientation in UG when using the File -> Export -> Tiff route.
Tim Flater
Senior Designer
Enkei America, Inc.
As far as I know, there is no control over the image orientation in UG when using the File -> Export -> Tiff route.
Tim Flater
Senior Designer
Enkei America, Inc.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
