Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Export matrixes from I-deas
- Thread starter mrWint
- Start date
gurmeet2003
Mechanical
mrWint,
In ANSYS one can write stiffness matrices. And actually under graphic menu called 'Analysis options', one can pick a ' Partial solution'. Then one is given the option to pick the type of partial soulution and writing the 'Stiffness matrix' is one of the options. I wonder if there is something similar in Ideas.
Thanks,
Gurmeet
In ANSYS one can write stiffness matrices. And actually under graphic menu called 'Analysis options', one can pick a ' Partial solution'. Then one is given the option to pick the type of partial soulution and writing the 'Stiffness matrix' is one of the options. I wonder if there is something similar in Ideas.
Thanks,
Gurmeet
- Status
Similar threads
- Question
- Locked
- Locked
- Question
- Locked
- Question