Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Export a part and modify it in autocad

Status
Not open for further replies.

trabu

Civil/Environmental
Joined
Mar 30, 2006
Messages
7
Location
IT
I want export a part and modify it with autocad.
I've a problem: i save it as a .sat file, but when in autocad i try to import it, there is this error message:

È impossibile leggere il file ACIS C:\Documents and
Settings\Administrator\Desktop\Analisi\aggancio.sat

There is somebady who knows how resolve the problem?
Thanks
 
Some ideas:
1. Try an Autocad forum.
2. Try to export in IGES format and use an other decent CAD program which "leggere" IGES (since as far as I know Autocad does not "leggere" IGES imports). You can import IGES to Mechanical Desktop, though.
3. Same as 2. but for STEP and VDA formats


 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top