Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Expanding diameter fasteners

Status
Not open for further replies.
ct00371

ct00371

Aerospace
May 31, 2007
1
I would like some help in the analysis of expanding diameter fasteners. Specifically the calculation of the moment associated with gapping of the collets from the fastener core.
 
Status
Not open for further replies.

Similar threads

GOSP75
  • Locked
NDT req for butt weld bottom plates where no annular plates small diameter API 650 tank .RT is required or Vacuum box testing is enough.
Replies
5
Views
5K
HTURKAK
HTURKAK
Tmoose
  • Locked
  • Question
antiseize for galvanized fasteners
Replies
9
Views
974
Tmoose
Tmoose
TylerClimber
  • Locked
  • Question
Effects of reduced major diameter of a bolt on the nut? 1
Replies
7
Views
665
desertfox
desertfox
Abdullah J
  • Locked
  • Question
Is there an official reference restricts welding Gr. 8.8 fasteners ? 12
Replies
10
Views
612
PersonalProfile
PersonalProfile
DesEngineer4
  • Locked
  • Question
Need your suggestions on Fixing 2 Tones KG component with Fasteners
Replies
3
Views
253
DesEngineer4
DesEngineer4

Part and Inventory Search

Sponsor

Back
Top Bottom