Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Excel sheet to Calculate Fire Flow at Hydrants based on NFPA

Status
Not open for further replies.
waseem19

waseem19

Civil/Environmental
Joined
Nov 23, 2002
Messages
82
Location
AE
Dear all,

Has anybody developed such a sheet? I started going through NFPA to make one my self but I'm not sure of what I'm doing , I found the calculation method in more than one standard with different method and new exceptions and/or allowed reductions, I feel like I have to read all of the 300 standards to make such a sheet and be confident that I have not missed anything.

Thanks.

 
Status
Not open for further replies.

Similar threads

M
  • Locked
  • Question Question
How to calculate flow in a pipe from water level masurements
Replies
8
Views
2K
bimr
bimr
geotechguy1
  • Locked
  • Question Question
Co-seismic fire ignition at WTP and WWTP
Replies
2
Views
929
bimr
bimr
linemesomepipe
  • Locked
  • Question Question
Water flow rate at temporary hydrant
Replies
5
Views
736
1503-44
1503-44
swazimatt
  • Locked
  • Question Question
Peak flow graph
Replies
4
Views
643
bimr
bimr
oshead
  • Locked
  • Question Question
Table Top Fire Flow Calculation
Replies
8
Views
794
1503-44
1503-44

Part and Inventory Search

Sponsor

Back
Top