Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Example Problem for Structural Stress Method for Multiaxial Fatigue

Status
Not open for further replies.
misc

misc

Mechanical
Joined
May 27, 2003
Messages
11
Location
US
Does anyone know of a source of an example problem(s) for the Structural Stress Method for the fatigue analysis of welds given in 2023 ASME B&PV Code Section VIII, Div. 2 Paragraph 5.5.5 that considers paragraph 5.5.5.3, which looks at multi-axial fatigue and the phase angle between shear and normal stresses. The example problem in the Example Problems Manual PTB-3-2022 does not include consideration of paragraph 5.5.5.3 methods.
Many thanks in advance!
 
Status
Not open for further replies.

Similar threads

LS_SMS
  • Question Question
Primary Membrane Stress Range for Thermal Stress Ratchet
Replies
4
Views
13K
GD2
GD2
BasakAbhishek
  • Question Question
Shell forming method with low out of roundness for thin shell
Replies
17
Views
18K
r6155
r6155
krzychu1904
  • Question Question
Local Vs global stress and fatigue analysis in fea analysis
Replies
9
Views
17K
TomLee777
TomLee777
BSAS-GWB
  • Question Question
Fatigue - Nozzle Inside Corner Radius
Replies
2
Views
8K
CuMo
CuMo
Ratheesh_n
  • Question Question
stress reliving on 3mm 625 plate butt weld during PQR qualification for utilising in cladded vessel
Replies
2
Views
11K
Ratheesh_n
Ratheesh_n

Part and Inventory Search

Sponsor

Back
Top