Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Examine 3D. Intersection of two openings.

Thread starter oscarl
Start date Sep 11, 2009

Status: Not open for further replies.

Sep 11, 2009

oscarl

Geotechnical

I hope one of you can help me about this software. This is a rocscience software to determine the displacements and stresses in rock excavation. It works with boundary elements. I have a problem about intersecting two circular openings.. If someone has used it..I would appreciate your help!!
Thanks!