Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

EVALUATED CORROSION FOR STRUCTURE OF MAST/DERRICK IN OIL INDUSTRIES

Status
Not open for further replies.
C4M1L0

C4M1L0

Mechanical
Joined
Oct 7, 2024
Messages
1
Location
EC
As we know the allowable thicknesses in a structure corresponding to a derrick mast corresponds to 10% of its nominal thickness according to API RP 4G, however, how would this corrosion be evaluated in the case that in the same structure there is a hole for a pin.
 
Status
Not open for further replies.

Similar threads

awesomeness
  • Question Question
Effect of microstructure on crevice corrosion for SDSS
Replies
5
Views
18K
weldstan
weldstan
I
  • Question Question
Crevice corrosion in 316L threaded fitting
Replies
12
Views
17K
EdStainless
EdStainless
nabeel3
  • Question Question
What type of Corrosion
2
Replies
25
Views
14K
mfgenggear
mfgenggear
rudiawan .
  • Locked
  • Question Question
stastitical analysis of calculation of corrosion growth rates
Replies
3
Views
3K
EdStainless
EdStainless
D
  • Question Question
Titanium-Stainless Steel Galvanic corrosion
Replies
17
Views
23K
3DDave
3DDave

Part and Inventory Search

Sponsor

Back
Top