Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

EUCOPOXY inject. to join a Culvert wall separated from its foundation

Status
Not open for further replies.

ggc69889

Civil/Environmental
Joined
Apr 19, 2005
Messages
6
Location
US
Please, I would like to get some recommendation to join the wall of a Culvert that was separated from its foundation. The separation is approx. 1-inch, the foundation has settlement. We are planning to use Eucopoxy (EUCO #452) Injection Resin-Structural Bonding Adhesive, however we were told that it can not be pumped. We also are planning to add a foundation slab along the existing, since the existing has settled. We would appreciate if through this helpful forum we can get more or better ideas to fill the 1-inch gap (almost 10' long) between the wall of the culvert and it's foundation.
Thanks!
 
I would think it would be a good idea to fix the subgrade / settlement issue before tying the wall to the foundation. How about jacking the slab back up using grout?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top